Apple Valley homeowners replacing a furnace in 2026 face a wide range of quotes — from $2,500 to over $8,000 for essentially the same job. The difference isn't equipment quality; it's where you buy the equipment. Here's the straightforward breakdown for Apple Valley.
Apple Valley Furnace Replacement Costs
| Approach | Total Estimate | Key Factor |
|---|---|---|
| Full-service HVAC contractor | $4,500–$8,500 | Equipment markup drives cost |
| Furnace Direct + independent installer | $2,600–$4,500 | Factory equipment pricing |
Call (888) 762-1334 for current Goodman pricing.
Buy the same name-brand furnace the pros install — shipped factory-direct to your door. No middleman, 5-star rated, and financing available.
Apple Valley Home Sizing
Apple Valley has a mix of 1970s–2000s single-family homes, many in the 1,400–2,400 sq ft range. Standard sizing for Apple Valley's climate:
- 1,200–1,800 sq ft: 60,000–80,000 BTU
- 1,800–2,400 sq ft: 80,000–100,000 BTU
- 2,400–3,200 sq ft: 100,000–120,000 BTU
Use our BTU Calculator for an Apple Valley-specific estimate accounting for your home's insulation and window quality.
Permit Requirements in Apple Valley
Apple Valley requires a mechanical permit for furnace replacements. Your licensed installer pulls this permit as part of the installation job. Fee: approximately $100–$175. The Dakota County area has reliable permit processing and inspection scheduling.
How much does furnace installation labor cost in Apple Valley?
Installation labor for a standard furnace swap in Apple Valley runs $900–$1,600 for most jobs. This includes disconnecting the old unit, installing the new furnace, running PVC venting (for high-efficiency units), connecting gas and electrical, commissioning, and old unit removal. Complex jobs (combo furnace+AC, ductwork modifications) run higher.
What furnace size do I need for my Apple Valley home?
Use the BTU Calculator for precision. As a starting point, Apple Valley homes need 40–50 BTU per square foot for standard insulation levels. A 1,800 sq ft home with good insulation: 72,000–90,000 BTU input (look for 80,000 BTU furnaces). A 1,800 sq ft home with original 1970s insulation: 80,000–100,000 BTU. When in doubt, have an installer verify with a Manual J load calculation.
Get your furnace replaced.
Tell us a little about your home and what you're replacing. A specialist will call you to work out exactly what you need, go over the price, and get it replaced. No obligation.