Whirlpool

Whirlpool 5 Ton Packaged Heat Pump 13.4 SEER2 Horizontal R-454B

SKU: RHPBYB060AJT000NA

$5,752.99
As low as $239.70/mo with Shop Pay or Affirm financing*

Ships same day — order by 2 PM CT
Questions about sizing? Call (888) 762-1334

Free Freight
Pallet delivery
Full Warranty
Manufacturer
0% Financing
Shop Pay / Affirm
Factory Direct
No middleman
Add Professional Installation Licensed HVAC techs in your area. Schedule at checkout.

About this product

The RHPBYB packaged heat pumps are designed for horizontal air discharge. Complete with PlusOne Refrigerant Detection System, corrosion resistant condensate drain pan, direct drive, permanently lubricated blower and condenser fan motors, round duct collars, sloped drain pan and base rails. Insertion electric heat kits are available for most applications. All units are 208/230 volt 1 phase.

Free delivery — usually same or next business day, direct from a regional distribution branch near you.

Features

  • Supply & Return Conn. 14" round
  • Reliable scroll compressor
  • Demand defrost control for energy savings
  • TXVs and drier installed
  • High and low pressure controls
  • Two-speed constant torque indoor blower motor
  • Slide-out blower for accessibility
  • Refrigerant connections located for easy service
  • Supplemental electric heat kits available up to 20 kW
  • Easily accessible control box
  • Supply and return air openings for round duct

Specifications

Cooling Capacity (BTU) 57,500
Heating Capacity (BTU) 56,400
Dimensions (H x W x D) 37-1/8 x 33 x 59"
Amps 40
Fuse Amps (Max.) 60
S.E.E.R.2 13.4
E.E.R.2 10.6
H.S.P.F.2 6.7

Brand-new in factory packaging. Manufacturer warranty applies (register after install). Sold as equipment only — installation by your licensed HVAC contractor. Questions on sizing? Message us before you order.

Specifications

BrandWhirlpool
SKURHPBYB060AJT000NA
TypePackaged Heat Pumps
WarrantyManufacturer
ShippingFree pallet freight

What customers are saying

★★★★★ · verified reviews
★★★★★ Feb 2026

Saved $2,400 vs local contractor

Got quoted $9,200 from a local HVAC contractor for a furnace replacement. Found Furnace Direct and got the exact same Goodman unit for under $5k delivered. My installer couldn't believe the price and installed it in one day. Runs perfectly.

Dave M. — Greensboro, NC Verified buyer
★★★★★ Jan 2026

Fast shipping, exactly as described

Ordered on a Tuesday, pallet arrived Friday. Unit was packed well, no damage, all factory sealed. Andrew answered my sizing question over the phone and got me the right model. Couldn't be happier with the purchase.

Karen L. — Fort Myers, FL Verified buyer
★★★★★ Jan 2026

Installer said same one he'd buy at supply house

My HVAC guy said he pays basically the same price at his wholesale supply house. The markup contractors add is insane. Furnace Direct cut the middleman out entirely. Will recommend to everyone I know.

Mike T. — Cape Coral, FL Verified buyer
★★★★★ Dec 2025

Heating my 2,200 sq ft home perfectly

Installed my 96% AFUE furnace a couple months ago. Heats my 2,200 sq ft home perfectly, and my gas bill dropped noticeably compared to the old unit. Great product, great price, great experience from start to finish.

Steve R. — Winston-Salem, NC Verified buyer
★★★★★ Dec 2025

Saved enough to pay for the install

Math was simple: 3 contractor quotes all over $8k. Furnace Direct plus local installer was under $5,500 total. Saved enough to basically pay for the install myself. Quality is identical to what contractors charge a fortune for.

Jennifer B. — Naples, FL Verified buyer
★★★★★ Nov 2025

No-pressure, honest pricing

Called a few HVAC companies first — every single one wanted to schedule an "in-home consultation" before giving me a price. Furnace Direct just showed me the price. Bought online, shipped next day, done. This is how it should work.

Robert K. — High Point, NC Verified buyer

Common Questions About This Packaged Heat Pumps

How much does installation cost?
Installation for this system typically runs $2,200–$3,800 depending on slab/pad, electrical disconnect, line set, and any duct adaptation. Pricing is set after a quick install scope review with our installer network. Equipment ships separately; install date is scheduled once payment clears.
How do I know if this will fit my home?
AC sizing depends on cooled square footage, ceiling height, sun exposure, insulation, and Florida humidity load. Rule of thumb: 1.5 ton fits ~750 sqft, 2 ton fits ~1,000 sqft, 2.5 ton fits ~1,250 sqft, 3 ton fits ~1,500 sqft, 4 ton fits ~2,000 sqft, 5 ton fits ~2,500+ sqft. Confirm with us before ordering — over-sizing wastes energy and under-sizing strains the system.
What is the warranty?
All equipment ships with the full manufacturer warranty (typically 10 years parts, 1 year labor on the compressor/heat exchanger). Registration is required — we send registration instructions with the unit. Install through our licensed installer network preserves the warranty; DIY install may void coverage depending on the manufacturer.
How fast does this ship?
In-stock equipment ships within 1–2 business days via freight (pallet delivery). Transit is typically 3–7 business days depending on your zip. You will receive a tracking number and the freight carrier will call to schedule curbside delivery. Equipment is in stock unless the product page shows "Special Order".
Is financing available?
Yes. Shop Pay and Affirm offer 0–36% APR financing at checkout with options from 3 to 48 months — most homeowners qualify for $150–$250/mo payments on a full system. For installs we work with Wisetack home-services financing (no impact to credit to check rates). Apply at checkout and a decision takes under a minute.
Do you handle the install permit?
Permits are handled by your local installer when required (most Florida and Minnesota jurisdictions require an HVAC permit for furnace, AC, or heat pump install). Permit fees are part of the install quote, not included in the equipment price. If your city does not require a permit, we skip it.
Can I install this myself?
We do not recommend DIY install on this system — it requires brazing, refrigerant charging, gas line connection (for furnaces), and electrical work that a licensed HVAC tech should handle. DIY install will likely void the manufacturer warranty. We pair every purchase with a licensed installer in your area.